 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PD - 94924 IRG4PC30WPBF INSULATED GATE BIPOLAR TRANSISTOR Designed expressly for Switch-Mode Power Supply and PFC (power factor correction) applications Industry-benchmark switching losses improve efficiency of all power supply topologies 50% reduction of Eoff parameter Low IGBT conduction losses Latest-generation IGBT design and construction offers tighter parameters distribution, exceptional reliability Lead-Free Features C VCES = 600V G E VCE(on) max. = 2.70V @VGE = 15V, IC = 12A n-channel Benefits Lower switching losses allow more cost-effective operation than power MOSFETs up to 150 kHz ("hard switched" mode) Of particular benefit to single-ended converters and boost PFC topologies 150W and higher Low conduction losses and minimal minority-carrier recombination make these an excellent option for resonant mode switching as well (up to >>300 kHz) Absolute Maximum Ratings Parameter VCES IC @ TC = 25C IC @ TC = 100C ICM ILM VGE EARV PD @ TC = 25C PD @ TC = 100C TJ TSTG Collector-to-Emitter Breakdown Voltage Continuous Collector Current Continuous Collector Current Pulsed Collector Current Clamped Inductive Load Current Gate-to-Emitter Voltage Reverse Voltage Avalanche Energy Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds Mounting torque, 6-32 or M3 screw. TO-247AC Max. 600 23 12 92 92 20 180 100 42 -55 to + 150 300 (0.063 in. (1.6mm from case ) 10 lbfin (1.1Nm) Units V A V mJ W C Thermal Resistance Parameter RJC RCS RJA Wt Junction-to-Case Case-to-Sink, Flat, Greased Surface Junction-to-Ambient, typical socket mount Weight Typ. 0.24 6 (0.21) Max. 1.2 40 Units C/W g (oz) www.irf.com 1 12/30/03 IRG4PC30WPBF Electrical Characteristics @ TJ = 25C (unless otherwise specified) V(BR)CES V(BR)ECS V(BR)CES/TJ VCE(ON) VGE(th) VGE(th)/TJ gfe ICES IGES Parameter Min. Typ. Collector-to-Emitter Breakdown Voltage 600 Emitter-to-Collector Breakdown Voltage 18 Temperature Coeff. of Breakdown Voltage 0.34 2.1 Collector-to-Emitter Saturation Voltage 2.45 1.95 Gate Threshold Voltage 3.0 Temperature Coeff. of Threshold Voltage -11 Forward Transconductance 11 16 Zero Gate Voltage Collector Current Gate-to-Emitter Leakage Current Max. Units Conditions V VGE = 0V, IC = 250A V VGE = 0V, IC = 1.0A V/C VGE = 0V, IC = 1.0mA 2.7 IC = 12A VGE = 15V IC = 23A See Fig.2, 5 V IC = 12A , TJ = 150C 6.0 VCE = VGE, IC = 250A mV/C VCE = VGE, IC = 250A S VCE = 100 V, IC = 12A 250 VGE = 0V, VCE = 600V A 2.0 VGE = 0V, VCE = 10V, TJ = 25C 1000 VGE = 0V, VCE = 600V, TJ = 150C 100 n A VGE = 20V Switching Characteristics @ TJ = 25C (unless otherwise specified) Qg Qge Qgc t d(on) tr td(off) tf Eon Eoff Ets td(on) tr t d(off) tf E ts LE Cies Coes Cres Notes: Parameter Total Gate Charge (turn-on) Gate - Emitter Charge (turn-on) Gate - Collector Charge (turn-on) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Switching Loss Turn-Off Switching Loss Total Switching Loss Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Switching Loss Internal Emitter Inductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Min. Typ. 51 7.6 18 25 16 99 67 0.13 0.13 0.26 24 17 150 150 0.55 13 980 71 18 Max. Units Conditions 76 IC = 12A 11 nC VCC = 400V See Fig.8 27 VGE = 15V TJ = 25C ns 150 IC = 12A, VCC = 480V 100 VGE = 15V, RG = 23 Energy losses include "tail" mJ See Fig. 10, 11, 13, 14 0.35 TJ = 150C, IC = 12A, VCC = 480V ns VGE = 15V, RG = 23 Energy losses include "tail" mJ See Fig. 13, 14 nH Measured 5mm from package VGE = 0V pF VCC = 30V See Fig. 7 = 1.0MHz Repetitive rating; VGE = 20V, pulse width limited by max. junction temperature. ( See fig. 13b ) VCC = 80%(VCES), VGE = 20V, L = 10H, RG = 23, (See fig. 13a) Pulse width 80s; duty factor 0.1%. Pulse width 5.0s, single shot. Repetitive rating; pulse width limited by maximum junction temperature. 2 www.irf.com IRG4PC30WPBF 40 For both: Triangular wave: Load Current ( A ) 30 Duty cycle: 50% T J = 125C T sink = 90C Gate drive as specified Power Dissipation = 24W Clamp voltage: 80% of rated Square wave: 20 60% of rated voltage 10 Ideal diodes 0 0.1 1 10 A 100 f, Frequency (kHz) (For square wave, I=IRMS of fundamental; for triangular wave, I=IPK) Fig. 1 - Typical Load Current vs. Frequency 100 100 I C , Collector-to-Emitter Current (A) I C , Collector-to-Emitter Current (A) TJ = 150 C 10 TJ = 150 C 10 TJ = 25 C TJ = 25 C 1 1 VGE = 15V 20s PULSE WIDTH 1 10 0.1 5.0 V CC = 50V 5s PULSE WIDTH 6.0 7.0 8.0 9.0 10.0 11.0 VCE , Collector-to-Emitter Voltage (V) VGE , Gate-to-Emitter Voltage (V) Fig. 2 - Typical Output Characteristics Fig. 3 - Typical Transfer Characteristics www.irf.com 3 IRG4PC30WPBF Maximum DC Collector Current (A 25 V GE = 15V 3.0 VCE , Collector-to-Emitter Voltage(V) VGE = 15V 80 us PULSE WIDTH IC = 24 A 20 2.5 15 IC = 12 A 2.0 10 IC = 6A 5 0 25 50 75 100 125 A 150 1.5 -60 -40 -20 0 20 40 60 80 100 120 140 160 TC , Case Temperature (C) TJ , Junction Temperature ( C) Fig. 4 - Maximum Collector Current vs. Case Temperature Fig. 5 - Collector-to-Emitter Voltage vs. Junction Temperature 10 Thermal Response (Z thJC ) 1 D = 0.50 0.20 0.10 0.1 0.05 0.02 0.01 SINGLE PULSE (THERMAL RESPONSE) PDM t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = PDM x Z thJC + TC 0.001 0.01 0.1 1 0.01 0.00001 0.0001 t1 , Rectangular Pulse Duration (sec) Fig. 6 - Maximum Effective Transient Thermal Impedance, Junction-to-Case 4 www.irf.com IRG4PC30WPBF 2000 VGE , Gate-to-Emitter Voltage (V) VGE = 0V, f = 1MHz Cies = Cge + Cgc , Cce SHORTED Cres = Cgc Coes = Cce + Cgc 20 VCC = 400V I C = 12A 16 C, Capacitance (pF) 1500 Cies 1000 12 8 500 Coes Cres 4 0 0 1 10 100 0 10 20 30 40 50 60 VCE , Collector-to-Emitter Voltage (V) QG , Total Gate Charge (nC) Fig. 7 - Typical Capacitance vs. Collector-to-Emitter Voltage Fig. 8 - Typical Gate Charge vs. Gate-to-Emitter Voltage 0.5 Total Switching Losses (mJ) Total Switching Losses (mJ) VCC = 480V VGE = 15V TJ = 25 C 0.4 I C = 12A 10 23 RG = Ohm VGE = 15V VCC = 480V IC = 24 A 1 0.3 IC = 12 A IC = 0.1 6A 0.2 0.1 0.0 0 10 20 30 40 50 0.01 -60 -40 -20 0 20 40 60 80 100 120 140 160 RGR, Gate Resistance (Ohm) G, Gate Resistance () TJ , Junction Temperature ( C ) Fig. 9 - Typical Switching Losses vs. Gate Resistance Fig. 10 - Typical Switching Losses vs. Junction Temperature www.irf.com 5 IRG4PC30WPBF 1.5 I C , Collector-to-Emitter Current (A) Total Switching Losses (mJ) RG TJ VCC VGE 23 = Ohm = 150 C = 480V = 15V 1000 VGE = 20V GE TJ = 125C 100 1.0 SAFE OPERATING AREA 10 0.5 1 0.0 0.1 0 5 10 15 20 25 30 1 10 100 1000 I C , Collector-to-emitter Current (A) VCE , Collector-to-Emitter Voltage (V) Fig. 11 - Typical Switching Losses vs. Collector-to-Emitter Current Fig. 12 - Turn-Off SOA 6 www.irf.com IRG4PC30WPBF L 50V 1000V VC * D.U.T. RL = 0 - 480V 480V 4 X IC@25C c 480F 960V d * Driver same type as D.U.T.; Vc = 80% of Vce(max) * Note: Due to the 50V power supply, pulse width and inductor will increase to obtain rated Id. Fig. 13a - Clamped Inductive Load Test Circuit Fig. 13b - Pulsed Collector Current Test Circuit IC L Driver* 50V 1000V VC D.U.T. Fig. 14a - Switching Loss Test Circuit * Driver same type as D.U.T., VC = 480V A d e c d 90% e VC 90% 10% t d(off) Fig. 14b - Switching Loss Waveforms 10% I C 5% t d(on) tr E on E ts = (Eon +Eoff ) tf t=5s E off www.irf.com 7 IRG4PC30WPBF TO-247AC Package Outline 15.90 (.626) 15.30 (.602) -B3.65 (.143) 3.55 (.140) -A- Dimensions are shown in millimeters (inches) -D5.30 (.209) 4.70 (.185) 0.25 (.010) M D B M 5.50 (.217) 2.50 (.089) 1.50 (.059) 4 20.30 (.800) 19.70 (.775) 1 2 3 2X 5.50 (.217) 4.50 (.177) NOTES: 1 DIMENSIONING & TOLERANCING PER ANSI Y14.5M, 1982. 2 CONTROLLING DIMENSION : INCH. 3 CONFORMS TO JEDEC OUTLINE TO-247-AC. -C14.80 (.583) 14.20 (.559) 4.30 (.170) 3.70 (.145) 2.40 (.094) 2.00 (.079) 2X 5.45 (.215) 2X 1.40 (.056) 3X 1.00 (.039) 0.25 (.010) M 3.40 (.133) 3.00 (.118) C AS 0.80 (.031) 3X 0.40 (.016) 2.60 (.102) 2.20 (.087) LEAD ASSIGNMENTS Hexfet IGBT 1 -LEAD ASSIGNMENTS Gate 1 - Gate 1 - GATE2 - Collector 2 - Drain 2 - DRAIN 3 - Source 3 - Emitter 3 - SOURCE 4 - Drain DRAIN - Collector 4 4- TO-247AC Part Marking Information EXAMPLE: T HIS IS AN IRFPE30 WIT H ASSEMBLY LOT CODE 5657 ASSEMBLED ON WW 35, 2000 IN THE AS SEMBLY LINE "H" Note: "P" in assembly line position indicates "Lead-Free" INT ERNATIONAL RECT IFIER LOGO ASSEMBLY LOT CODE PART NUMBER IRFPE30 56 035H 57 DAT E CODE YEAR 0 = 2000 WEEK 35 LINE H Data and specifications subject to change without notice. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.12/03 8 www.irf.com Note: For the most current drawings please refer to the IR website at: http://www.irf.com/package/ |
Price & Availability of IRG4PC30WPBF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |